Heat Pump Loans & Rebates Available…

1. Heat pumps must have a minimum HSPF (Heating Seasonal Performance Factor) of 8.5 & a SEER (Seasonal Energy Efficiency Ratio) of 14.0. The American Refrigeration Institute (ARI) or the Manufacturer must certify efficiency ratings.
2. Heat pumps need to meet the Performance Tested Comfort Standards (PTCS) requirements which includes duct sealing and heat pump commissioning components. For additional information, please refer to www.bpa.gov/Energy/N/projects/ptcs/www.bpa.gov/Energy/N/projects/ptcs/
3. Lane Electric will verify that your existing transformer and service wire to the meter are adequately sized to meet the starting requirements of the new heat pump. If necessary, we will schedule a time to upgrade your system.
4. Heat Pumps must be installed in a permanent residence (no hardship permits) served by Lane Electric.

Heat Pump Rebate and Loan Information

1. You may apply for a loan OR a rebate (not both). A 0% interest loan of up to $9,000 is available on qualified systems. Loans are not available for new construction.
2. If you want to participate in our loan process:
• Fill out your choice of the enclosed loan applications. Be sure it is completed and signed.
• Return the loan application, your proposed system bid, and preauthorization form to Lane Electric.
• Application results are usually known within 48 hours.
• Upon loan and preauthorization approval, notify the contractor to begin installation.
3. Rebates are $1,000 for air-source (standard) heat pumps, geothermal units, and replacing an older air-source heat pump with a more efficient model (replacement must meet requirements stated above).
4. Rebates must be applied for within 30 days of system installation. Funds are available on a first come first serve basis.

Notify Lane Electric when installation is complete & ready for inspection.

To insure your complete satisfaction when installing a heat pump, please follow this checklist:

• Be sure your electric service meets the additional requirements for serving a heat pump. Your contractor should address this issue.
  PLEASE NOTE: Lane Electric will evaluate the service to your meter to insure it will meet the starting requirements of the new heat pump. If necessary, we will schedule a time to upgrade your system.
• Read the enclosed information on heat pump systems.
• Make the "shell" of your home as energy efficient as possible. An analysis or energy audit of the building components and existing insulation levels will help determine what weatherization items, if any, should be completed prior to installing your new heat pump. Insulation levels in your home must meet LEC specifications before any incentives will be available for heat pumps.
• Contact dealers for bids. A Contractor List with several choices can be obtained from our office. As you obtain your bids, feel free to contact our Energy Services Department if you have any questions.
• Ducts are one of the most important parts of your system! Reduce duct losses by having existing ducting tested and sealed. On new duct systems, make sure your contractor understands that you are requiring sealed ducts as part of your installation package. You may qualify for an Oregon State tax credit for this type of duct sealing.
• For Loans: Choose the bid you wish to use. Return the bid, the preauthorization sheet (completed by the contractor), and your credit application to Lane Electric’s Energy Services Department.
• Wait to hear from Lane Electric regarding loan approval. When financing and system preauthorization are approved, call your contractor and have them begin installation. Important: Do not commit to an installation until you are notified that these items are authorized.
• OR, if you wish to apply for a Rebate, have your contractor complete a system preauthorization form prior to starting the job. After authorization by LEC’s Energy Services Department, have your contractor begin installation. After the job is complete, return the rebate form with the sales receipt to Lane Electric within 30 days of installation of the system.
• Upon job completion, return the inspection request form included in your HP packet. We will inspect the components of your new heating system and answer any final questions. Your rebate or loan will be processed when the inspection is complete and the system approved.
• Please call one of our Energy Services Representatives at (541)484-1151 if you have any questions.